MiPi Box Pro is a UFS / eMMC chip programmer intended for reading / writing / repairing data.

How to register?

Download the MiPi Drivers and Software

Features:

UFS / UMCP / ISP – Data transfer speed

• UFS/UMCP
  • UFS 2.0 / 2.1 / 3.0 / 3.1 supported
• HS-G2 high speed mode
  • 80-130 MB/s (writing) / 100-180 MB/s (reading)
  • for 100 MB higher speed you need to use USB 3.0 + high speed SSD
• UFS ISP
  Flying Line Mode PWM-G1 6-15MB/s (reading / writing)

EMMC/EMCP – Data transfer speed

• EMMC 4.5 / 5.0 / 5.1 supported
• HS200 80-120MB/s (write) / 120MB/s (read)
• EMMC ISP 5-15MB/s (read / write)

Upgrade NAND / PCIE / NVME / NOR / SPI / I2C Flash

• Supports UFS/UMCP dedicated descriptors, attributes, flags and other chip initialization and advanced settings
• LUN cutting
• Read / Write / Specify boot area
• Read / Write EMMC/EMCP User Area and BOOT1/2
• Read / Write advanced RPMB, GPP
• Enhanced Area settings
• Voltage output (VCC, VCCQ) 1.1 V – 3.3 V + intelligent short circuit protection

Supported BGA:

• UFS BGA 254
• UFS BGA 153
• eMMC BGA 153-169
• eMMC BGA 254
• eMMC BGA 221
• eMMC BGA 162-186

How to Register MiPi Tester:

1. 1. Launch the Mipi Tester application
      Download Mipi Tester >
   2. Press the button indicated on the screenshot below.

1. 1. Enter username, password, and phone number (must be 11 digits long).

1. 1. Click the Register button.

1. Once you opened the software, you can change the software language.

Package Content:

1. MiPi Box Pro – 1 pc.
2. MiPi eMMC/UFS ISP Adapter – 1 pc.
3. MiPi UFS 254/153 Socket Adapter- 1 pc.
4. MiPi USB 3.0 Cable – 1 pc.
5. MiPi DC5V Power Cable – 1 pc.
6. MiPi ANDROIDKING eMMC/UFS Socket Adapter – 11 in 1 set
   • AK-UFS BGA 254 – 1 pc.
   • AK-UFS BGA 153 – 1 pc.
   • AK-eMMC BGA 153-169 – 1 pc.
   • AK-eMMC BGA 254 – 1 pc.
   • AK-eMMC BGA 221 – 1 pc.
   • AK-eMMC BGA 162-186 – 1 pc.

   Frames:

   • 7,5*9
   • 11*10
   • 11.5*13
   • 12*15
   • 12*16

MiPi Tester Box Setup DOWNLOAD