Infinity CM2 SPD Latest Setup v2.05

Spread the love

Infinity Chinese Miracle-2 SPD/UniSOC v2.05 – NAND, KaiOs and new features

As ordinary, unique functions and methods released

Core
NewChip : SC7731E with NAND ( KaiOS and MocorDroid5 )
NewChip : SC7715x with NAND ( KaiOS , MocorDroid5 , Android 4x)
NewChip : SC9820x with NAND ( MocorDroid5 , Android 4x)
Protocol : Speed increased for most operations ( SPD and UniSOC )
Protocol : Protocol changes according SPD/UniSOC R23 line

New Feature : NAND support ( SPD and UniSOC generation )
!* Support flashing Factory / InfinityFW
!* Support correct flash selection and servicing phones with NAND
!* Support InfinityFW reading ( Complete, Factory-Like )
!* Support Service operations

Service
Changed : Repair security procedure updated (Flash and Diag mode)
Changed : Identify procedure updated
!* Support complete and fast NAND devices identification
!* Support complete simlock info structure identify and verify
!* Support multi-nv structure detection and security info detection
!* Database update / self-learning updated
!* FileSystem identification support UBIFS and F2FS detection
Changed : Format FS / Reset FRP procedure updated

Firmware Reader
New Feature : NAND support
!* Support old and new generations ( SPD and UniSOC )
!* Support plain Android , KaiOs and MocorDroid5 OS
!* Automatic and correct FileSystem creation for NAND devices
!* Support all security types, include UniSoc secure/signed
!* Produced FW is 100% like factory one
Changed : FileSystem creation engine updated ( UBIFS support , bugfixes )
Changed : Improved structure identification
Changed : Support more different types
Changed : Old SPD line support rebuild ( SC7715,SC7731,SC983x,SC9820x )
Changed : Fixed FW creation in full manual / skip verify mode settings

Flasher
New Feature : Complete flash erase ( whole flash format ) during flashing ( eMMC / NAND )
New Feature : Correct NAND flashing support ( SPD and UniSOC ) ( Factory PAC and InfinityFW )
Changed : Flashing core for InfinityFW more stable

Loader Database
NewChip : SC7715 BASE NAND revisions included
NewChip : SC9820 BASE NAND revisions included
NewChip : SC7731E BASE NAND revisions included
NewChip : SC7731E BASE eMMC LOW_MEM revisions included ( cheap A8-A9 devices )
NewChip : SC7731x BASE eMMC LOW_MEM revisions included ( old A4-A5 GEA devices )

Other
Changed : Manual mode : automatic structure and setting detection in manual mode
Changed : Automatic base settings selection for BASE loaders ( Protocol, Charging, FlashSettings )
Changed : Separate NAND mode option activated in platform settings for manual mode
BugFix : Lot of minor changes and bugfixes
Changed : Software compatibility with other applications improved

Password for files: 12345678

Infinity CM2 Setup Download

What is Infinity-Box / Dongle

Infinity-Box Dongle contains the following software, hardware and support:

  • Software for GSM and CDMA models, see listof supported models *
  • World-famous “Chinese Miracle” software for MTK / MediaTek, etc.
  • World-famous “Chinese Miracle-2” software for MTK / MediaTek, SPD / Spreadtrum, RDA / Coolsand, etc.
  • Protection Smart-Card
  • USB Smart-Card reader
  • Support area access (software, flash files, drivers, manuals, updates, bug-fixes, etc.)
  • Smart-Card upgrade server access
  • Support via e-mail
  • Support forum access

Note! After 1 year it is necessary to renew access by means of activation.

Before using the box, please read the following instructions.

Infinity-Box Dongle – Features:

  • Well known GSM and CDMA brands / models supported
  • “Chinese Miracle” MTK based brands / models supported
  • Standalone software (no Internet connection required)
  • SP-decode: remove / clear network, provider locks
  • Set network, provider locks
  • Read codes
  • Flash read / write (high speed)
  • Write any part of Flash separately (firmware, customization, flex, map, file system (FFS), language pack)
  • Upgrade / downgrade firmware
  • Repair damaged IMEI
  • Remove / clear / read user / phone lock code
  • Reset to default / factory settings
  • Repair dead phones
  • Read Flash / EEPROM area backup
  • Repair software-related problems
  • Read codes: network, provider codes, user / phone code
  • Empty board flashing (for example, after flash chip replacement)
  • Format file system
  • SCAT files read / write
  • Create security zone backup during critical operations
  • “Smart write” option, together with high-speed option flashing speed may be extremely high
  • Detect keyboard codes by flash file (“Keyboard codes detector”)
  • Save operation process results in a Log file
  • Big flash files database for all World regions
  • Compact flash / EEPROM files format: flash / backup files internally packed and unpacked on the fly. That way you can save up to 50% of your Internet traffic (download small files from support area) and save a lot of disk space on your HDD
  • Counter for decode / flash / other operations
  • Easy to use brand / model selection via “Shell”
  • Easy access to cables / pinouts information via “Cable selector”
  • Easy access to support area via automatic logon system and “Support manager”
  • Huge flash files database: firmware, language pack, flex, map, repair EEPROM, FFS files, etc., more than 20,000 files for different models
  • Documentation and manuals with step-by-step instructions

Note: To avoid any misunderstanding please check list of available functions for each supported model, different models have more or less functions, because of hardware / software limitations!

“Chinese Miracle” module for MTK-based models – Features:

  • Automatic phone structure detection: this means that you can also service phones which is not shown in supported models list. Just find a pinout and make sure that your phone is based on MT62xx CPU and you will be able to flash / decode / repair this phone.
  • Repair dual-SIM (dual-CPU) models: work with Rx_A/Tx_A, Rx_B/Tx_B pinouts to repair firmware for both CPU
  • Repair IMEI for single-SIM and dual-SIM models with different methods (MT6205, MT6223 dual configurations supported too)
  • Repair IMEI for single SIM/CPU models
  • Repair master IMEI (SIM-1) for dual-SIM (dual CPU) models
  • Repair slave IMEI (SIM-2) for dual-SIM (dual CPU) models
  • Repair master IMEI (SIM-1) for dual-SIM (single CPU) models
  • Repair slave IMEI (SIM-2) for dual-SIM (single CPU) models
  • Repair slave IMEI (SIM-3) for triple-SIM models
  • Automatic memory size detection
  • Direct SP-decode phones with unknown firmware (auto-detection algorithm)
  • Decode user locked phones with unknown firmware (auto-detection algorithm)
  • Format file system: auto-detect FFS structure and size, backup FFS before format
  • Reset to defaults phones with unknown firmware (auto-detection algorithm)
  • Write / Read Flash for phones with unknown structure (auto-detection algorithm)
  • Write / Read EEPROM for phones with unknown structure (auto-detection algorithm)
  • Firmware version auto-detect
  • Automatic firmware version detection and save original firmware version information in Log file during flash / format
  • Language list auto-detect
  • Repair “Power-On problem” for MT6205, MT6208, MT6217, MT6218, MT6219, MT6223, MT6225, MT6226, MT6227, MT6228, MT6229, MT6230, MT6235, MT6238, MT6239, MT6253, MT6268 CPU based models after full flash without backup, erased flash, etc.
  • Repair / recalculate security area (five different security area types supported) to repair dead phones based on MT6223, MT6225, MT6226, MT6227, MT6228, MT6229, MT6230, MT6235, MT6238, MT6239, MT6253, MT6268 CPU
  • Upgrade / downgrade phone firmware
  • Remove / clear network, provider locks
  • Read codes: network, provider codes, user / phone code
  • Reset phone settings to defaults (factory state)
  • Empty board flashing (for example, after flash chip replacement)
  • Create security zone backup during critical operations
  • Repair software-related problems
  • Repair dead phones
  • “Flash File Manager”: easy access to firmware information such as internal firmware name, language names, keyboard codes
  • Touchscreen calibration (repair phones with damaged touchscreen)
  • Repair “No licensed to produce” fault
  • Repair “Bad Software” fault (latest MT6223, MT6225, MT6226, MT6227 based models)
  • Repair “Code CRC Check Error” fault
  • Detect language names inside flash file
  • Detect keyboard codes inside flash file (for service menu, etc.)
  • Detect firmware version by flash file
  • Detect existing languages by flash file
  • Detect keyboard codes by flash file (“Keyboard codes detector”)
  • Batch flash file rename, version detection, language detection, name conversion
  • Save operation process results in Log file
  • Huge and almost complete flash files database: firmware, repair EEPROM, FFS files, etc.
  • Estimated remaining flash read / write time indication
  • Documentation and manuals with step-by-step instructions

List of available options for several supported models.

* Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions. Complete list of supported models you can find on the official product page, or on the GSM forum.

How to Download:
– Download Infinity Box/Dongle Setup
– Connect Infinity Box/Dongle to PC.
– Run Infinity Software.
– Enjoy!

(Visited 303 times, 1 visits today)